Laser cutting in marquetry leather: the design process with reuse of waste
DOI:
https://doi.org/10.5965/1982615x09172016268Keywords:
leather waste, laser cutting technology, fashion productsAbstract
The objective of this study was to present the marquetry process, with the use of laser cutting technology, applied to leather waste to develop fashion design products. This work was developed from the case study of Brantê brand, whose data were collected through observation and informal interviews. At the end of the study, it was found that the marquetry leather with the use of laser cutting is a process that can be applied to various kinds of products; also it realized that the products developed by Brantê get prominence in the market because they have aesthetic and symbolic value resultant of a distinctive design process. The reuse of leather also contributes to the result achieved by the company in the market, once the process is suitable to the standards of the products developed, according to quality criteria for reuse of a material discarded earlier.
Downloads
References
Associação Brasileira de Normas Técnicas (ABNT). NBR 10.004: Resíduos Sólidos –Classificação.Rio de Janeiro, 2004.
BARTZ, A.; SILVA, D.; FIGUEIREDO, T.; SPOHR, C.Processo de corte em máquinas laser. SIEF –Semana Internacional das Engenharias da FAHOR, 2011. Disponível em: . Acesso em: 12 mai. 2013.
CAMPOS H. S. AIndústria de Couros no Brasil -FEE. 2006. Disponível em: . Acesso em: 28 jun. 2013.
CASTILHOS, D.; TEDESCO, M.; VIDOR, C. Rendimentos de culturas e alterações químicas do solo tratado com resíduos de curtume e cromio hexavalente. Revista Brasileira de Ciência do Solo, Viçosa, v. 26, p. 1083-1092, 2002.
CIDADE, M. K. Caracterização e padronização do processo de gravação a laser em ágata aplicado ao design de joias.Dissertação (Mestrado em Design) –Programa de Pós-graduação em Design, Universidade Federal do Rio Grande do Sul, Porto Alegre, 2012.
COSTA, C.; CASTILHOS, D.; CASTILHOS, R.; KONRAD, E.; PASSIANOTO, C.; RODRIGUES, C. Efeito de adição de lodo de curtume sobres alterações químicas do solo, rendimento de matéria seca e absorção de nutrientes em soja. Revista Brasileira de Agrociência, Pelotas, v. 7, p. 189-191, 2001.
GUTTERRES, M.; OSÓRIO, T. MétodosAnalíticos Especiais Aplicados ao Couro. 2004. Disponível em: . Acesso em: 01 jul. 2013.
HU, J.; XIAO, Z.; ZHOU, R.; DENG, W.; WANG, M.; MA, S. Ecological Utilization of Leather Tannery Waste with Circular Economy Model.Journal of Cleaner Production. Vol. 19, 221 -228, 2011.
LAGO, R. O Perigo é Azul. 2007. Disponível em: www.ufmg.br.Acesso em: 11 jun. 2013.
MANZINI, E.; VEZZOLI, C. O Desenvolvimento de Produtos Sustentáveis: os requisitos ambientais dos produtos industriais. 1ª ed. 2ª reimpr. São Paulo: Editora da Universidade de São Paulo, 2008.
MATOS, P.; LOPES, Q.; NARDI, A.; OROFINO, G.; PIRES, S.; BICCA, D. Considerando mais o lixo. Florianópolis: Insular, 1999.
Ministério do Desenvolvimento, Indústria e Comércio Exterior Brasileiro. Couros e Calçados. Disponível em: .Acesso: 05 jul. 2013.
PACHECO, J. CURTUME –Série P+L. 2005. Disponível em: . Acesso em: 27 jun. 2013.
RASEIRA, C.Design e tecnologia aplicados a resíduos de madeira: Caracterização do processo de corte a laser para marchetaria.Dissertação (Mestrado em Design) –Programa de Pós-graduação em Design, Universidade Federal do Rio Grande do Sul, Porto Alegre, 2013.
SMITH, Q. An Introduction to Marchetry. American Marchetry Society –Couse, 2002. Disponívelem: . Acesso em: 05 jul. 2013.
STÜRMER, P. Materiais naturais: design e tecnologia no desenvolvimento de joias inspiradas na cultura gaúcha. Dissertação (Mestrado em Design) –Programa de Pós-graduação em Design, Universidade Federal do Rio Grande do Sul, Porto Alegre, 2010.
SUDHA, T.; THANIKAIVELAN, P.; AARON, K.; KRISHNARAJ, K; CHANDRASEKARAN, B. Comfort, Chemical, Mechanical, and Structural Properties of Natural and Synthetic Leathers Used for Apparel. Journal of Applied Polymer Science. Vol. 114, 1761–1767, 2009.
VAZ, H.; SILVA, L.; MARTINS, M; MODESTO JUNIOR, O. Aproveitamento dos Resíduos de Couros Curtidos com Cromo: Resíduos da Rebaixadeira. 2009. Disponível em: . Acesso em: 27 jun. 2013.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2015 Stella Lisboa Sapper, Uda Flavia Cunha Souza Fialho
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
When submitting an article for publication in ModaPalavra e-periodico, the author (s) agree (s) with the following terms:
- Authors maintain the copyright in their manuscripts and grant the journal the right of first publication, with work simultaneously licensed under the Creative Commons Attribution-NonCommercial 4.0 International, which allows sharing the work with the acknowledgment of authorship and the initial publication in the journal without payment ;
- Authors may use the same results in other publications after the first publication, provided that they indicate ModaPalavra e-journal as the original publication medium;
- Authors are authorized to take additional contracts, separately, only after the original publication in ModaPalavra e-journal, provided they indicate ModaPalavra e-journal as the original publication medium;
- Authors are allowed and encouraged to publish and distribute their work online (eg in institutional repositories or on their personal page), only after the editorial process and the first publication, provided they indicate ModaPalavra e-journal as the original publication medium;
- To indicate ModaPalavra e-journal as the original publication medium, authors should use the following text template: "This article was originally published by ModaPalavra e-periodical, under a CC BY NC license, in its volume [insert volume] number [insert number] in the year of [insert year], and can be accessed at: http://www.revistas.udesc.br/index.php/modapalavra/ ";
- The opinions expressed in the articles are the author’s sole responsibility, not necessarily reflecting the journal’s opinion. The publication of any material that is owned and held in copyright by a third party, including – but not limited to - articles, photos or drawings was previously authorized by their representatives to be published in ModaPalavra e-journal.
