Technological properties of cement-wood panels produced with eucalypt particles

Authors

  • Setsuo Iwakiri Universidade Federal do Paraná
  • Rosilani Trianoski Universidade Federal do Paraná.
  • Alexsandro Bayestorff Cunha Universidade do Estado de Santa Catarina.
  • José Guilherme Prata Universidade Federal do Paraná.
  • Massayuki Hara Universidade Tecnológica Federal do Paraná.
  • Narciso Fernando Bila Universidade Federal do Paraná.
  • Reinaldo Calçada Guina Luis
  • Roberto Daniel Araújo Instituto Nacional de Pesquisas da Amazônia.

DOI:

https://doi.org/10.5965/223811711432015217

Keywords:

Eucalyptus benthamii, Product for the building industry, Wood particles, Mineral binder.

Abstract

The study aimed to determine the technological properties of cement-wood panels produced with the particle Eucalyptus benthamii Maiden et Cambage. The experiment plan consisted of four compositions with different treatments of the particles (cold water, hot water, sodium hidroxyde (NaOH) and calcium hidroxyde (Ca(OH)2), and a control composition. The panels were produced with nominal specific gravity of 1.20 g cm-³, with the ratios wood:concrete 1:2.75 and water:cement 0.40. The panels were evaluated for their physical and mechanical properties through the European standard EN. Analyses were performed to verify the occurrence of outliers, data normality and homogeneity of variances, and subsequently submitted to analysis of variance and Tukey test. The results of physical and mechanical properties of the panels indicated that the best method of treating particles is through the use of Ca(OH)2. With the exception of the modulus of rupture, the thickness swelling, modulus of elasticity and tensile perpendicular, they met the specifications of commercial panels produced by the BISON process. Therefore, the feasibility of use of Eucalyptus benthamii for wood-cement panels production was discovered.

Downloads

Download data is not yet available.

Author Biography

Setsuo Iwakiri, Universidade Federal do Paraná

Engenheiro florestal - UFPR, mestre e doutor em engenharia Florestal - UFPR, Professor Titular do Departamento de Engenharia e Tecnologia Florestal, Universidade Federal do Paraná. Área  - Tecnologia e utilização de produtos florestais.

Downloads

Published

2015-12-03

How to Cite

IWAKIRI, Setsuo; TRIANOSKI, Rosilani; CUNHA, Alexsandro Bayestorff; PRATA, José Guilherme; HARA, Massayuki; BILA, Narciso Fernando; GUINA LUIS, Reinaldo Calçada; ARAÚJO, Roberto Daniel. Technological properties of cement-wood panels produced with eucalypt particles. Revista de Ciências Agroveterinárias, Lages, v. 14, n. 3, p. 217–223, 2015. DOI: 10.5965/223811711432015217. Disponível em: https://revistas.udesc.br/index.php/agroveterinaria/article/view/223811711432015217. Acesso em: 30 jun. 2024.

Issue

Vol. 14 No. 3 (2015)

Section

Research Article - Science of Plants and Derived Products

License

Authors publishing in this journal are in agreement with the following terms:

a) Authors maintain the copyrights and concede to the journal the copyright for the first publication, according to Creative Commons Attribution Licence.

b) Authors have the authority to assume additional contracts with the content of the manuscript.

c) Authors may supply and distribute the manuscript published by this journal.