Design in Cyborg Beast prostheses from the perspectives of Sargent (1994) and Lobach (2001)

Authors

DOI:

https://doi.org/10.5965/2316796311212022073

Keywords:

Design theory, prosthesis, Bern Lobach, Philip Sargent, product Design

Abstract

In the search to define design artifacts, there are different views for the same artifact. In this article, the views of Sargent (1994) and Lobach (2001) are discussed, evaluating the presence of design in the Cyborg Beast prosthesis, an open source product for 3D printing. Articles from developers and users of the prosthesis were confronted with the perspectives of these authors, they were collected in Scopus and Google Scholar, with the descriptor “Cyborg Beast” until the year 2020. They fit in some aspects of Sargent (1994) and Lobach (2001), and it is concluded that artifacts can partially fit into design definitions, according to the developer or user perspective.

Downloads

Download data is not yet available.

Author Biographies

Paula Conceição Rocha de Oliveira, São Paulo State University Júlio de Mesquita Filho

Graduated in Product Design from the State University of Maringá (UEM). Master student in Design, in the line of ergonomics research at Universidade Estadual Paulista Júlio de Mesquita Filho (Unesp), CAPES scholarship holder, with process 88887.597667 / 2021-00. Experience with technical design, 3D modeling, 3D printing, development of assistive technology and development of board games.

Marianna Chaparro, São Paulo State University Júlio de Mesquita Filho

Currently pursuing an academic master's degree in Product Planning with a line of research in Ergonomics at Universidade Estadual Paulista, he has a degree in Design from Centro Universitário Sagrado Coração (2019). Has experience in the area of ​​Industrial Design, with emphasis on Product Design.

Luis Carlos Paschoarelli, São Paulo State University Júlio de Mesquita Filho

Luis Carlos Paschoarelli is Full Professor in the Design Department at UNESP (2017); Lecturer in Ergonomic Design by UNESP (2009); post-doctorate in Ergonomics (2008) from ULISBOA; PhD in Production Engineering (2003) by UFSCar; Master in Design, Art and Society - Industrial Design (1997) and graduation in Industrial Design (1994) from UNESP. He is co-leader in the Ergonomic Design Research Group: Design and Interfaces where he coordinates the research projects: Ergonomic Design: evaluation and ergonomic intervention in the project, Ergonomic Design: methodologies for the evaluation of manual instruments in the interface between man and technology and Ergonomic Design Contributions in the research and design of equipment for the rehabilitation of people with specific requirements. He is based in the Laboratory of Ergonomics and Interfaces - Design Department, where he works as a professor in the undergraduate course in Design and in the Graduate Program (master's and doctorate) in Design at UNESP. He has experience in the field of design, ergonomics, ergonomic design, product design and graphic design. He is currently "Senior Ergonomist" at ABERGO - Associação Brasileira de Ergonomia.

References

ZUNIGA, Jorge; KATSAVELIS, Dimitrios; STOLLBERG, John; PETRYKOWSKI, Marc; CARSON, Adam; FERNANDEZ, Cristina. Cyborg beast: a low-cost 3d-printed prosthetic hand for children with upper-limb differences. BMC Research Notes, 8:10, 2015.

ZUNIGA, Jorge M.; DIMITRIOS, Katsavelis; PECK, Jean L; SRIVASTAVA, Rakesh; PIERCE, James E.; DUDLEY, Drew R; SALAZAR, David A.; YOUNG, Keaton J.; KNARR, Brian A. Coactivation index of children with congenital upper limb reduction deficiencies before and after using a wrist-driven 3D printed partial hand prosthesis. Journal of NeuroEngineering and Rehabilitation, v. 15, n. 1, 2018.

ZUNIGA, Jorge M.; PECK, Jean L; SRIVASTAVA, Rakesh; PIERCE, James E.; DUDLEY, Drew R; THAN, Nicholas A.; STERGIOU, Nicholas. Functional changes through the usage of 3D-printed transitional prostheses in children. Disability and Rehabilitation: Assistive Technology, v. 14, n. 1, p. 68–74, 2017.

ZUNIGA, Jorge M.; PECK, Jean; SRIVASTAVA, Rakesh; DIMITRIOS, Katsavelis; ADAM, Carson. Journal of Prosthetics and Orthotics, v. 28, n. 3, p. 103–108, 2016.

HAWTHORN, Peregrine; ASHBROOK, Daniel. Cyborg Pride: Self-Design in e-NABLE. ASSETS’ 17, 2017. Anais do 19th International ACM SIGACCESS Conference on Computers and Accessibility.

GIACONI, Carolina; NAHUELHUAL, Paula; DOTE, Jacqueline; CUBULLOS, Rodrigo; FUENTES, Gabriel; ZÚNIGA, Jorge. Experiences of the use of 3D printed hand orthoprosthesis (Cyborg Beast) in adolescents with congenital hand amputation and their main caregivers: A study of cases. Revista Chilena de Pediatría, v.9, 2019.

LOBACH, Bernd. Design Industrial. São Paulo: Editora Edgard Blücher, 2001.

SARGENT, Philip. Design science or nonscience. Design Studies, v. 15, n. 4, 1994.

Downloads

Published

2022-06-20

How to Cite

OLIVEIRA, Paula Conceição Rocha de; CHAPARRO, Marianna; PASCHOARELLI, Luis Carlos. Design in Cyborg Beast prostheses from the perspectives of Sargent (1994) and Lobach (2001). Human Factors in Design, Florianópolis, v. 11, n. 21, p. 073–096, 2022. DOI: 10.5965/2316796311212022073. Disponível em: https://revistas.udesc.br/index.php/hfd/article/view/20221. Acesso em: 17 jul. 2024.

Issue

Vol. 11 No. 21 (2022): Human Factors in Design

Section

Artigos

License

Copyright (c) 2022 Human Factors in Design

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Os artigos publicados pela revista são de uso gratuito, destinados a aplicações acadêmicas e não comerciais. Os direitos autorais são todos cedidos à revista. Os artigos cujos autores são identificados representam a expressão do ponto de vista de seus autores e não a posição oficial da revista Human Factors Design. O (s) autor (es) se compromete a sempre que publicar material referente ao artigo publicado na Revista Human Factors Design mencionar a referida publicação da seguinte forma:

Este artigo foi públicado originalmente pela Revista Human Factors Design em seu volume (colocar o volume), número (colocar o número) no ano de (colocar o ano) e pode ser acessado em: https://periodicos.udesc.br/index.php/hfd/index